atmega 芯片恢复fuse设置-程序员宅基地

A few days ago, we started to upload our program into the atmega2560 chips, but we found that the results are quite diffeerent on periodical running time. By measuring, we found that the system is 16 times slower than our expectation. Later on, we found that the system clock is 1Mhz and we were using the default fuse setting.

However, I mistakenly configured the fuse setting as External Clock (which should be External Crystal Clock). After that, I cannot comminicate with the atmega2560 chips through avrisp2 cables, so that I cannot even reconfigure the fuse setting again.

Fortunately, I found a work around to do this.

http://www.larsen-b.com/Article/260.html

However, I think the program to generate 1MHz clock in previous webpage is not good so that I found the following page to do this.

http://www.bot-thoughts.com/2011/06/generate-clock-signal-with-avr-atmega.html

And my code is listed here,

#include <avr/io.h>

int main(void)

{

TCNT1 = 0;

OCR1A = 8;

TCCR1A |= (1<<COM1A0);

TCCR1B |= (1<<WGM12);

TCCR1B |= (1<<CS10);

DDRB |= _BV(1);

while (1){

// Place your code here

};

return 0;

}

There is also one Chinese forum post about this.

http://www.ourdev.cn/bbs/bbs_content_all.jsp?bbs_sn=3762261

本文链接：https://blog.csdn.net/iteye_20809/article/details/82201196

原作者删帖不实内容删帖广告或垃圾文章投诉

智能推荐

GoF之单例模式-程序员宅基地

随后在写吧

Visio对一个对象进行水平翻转_visio水平翻转-程序员宅基地

Visio对一个对象进行水平翻转_visio水平翻转

字符串与13位时间戳的相互转化-程序员宅基地

def str_to_int13(t): int_t13 = datetime.datetime.strptime(str(t),"%Y-%m-%d %H:%M:%S") return int(int_t13.timestamp() * 1000)# pandas将某一列str时间转化为13位时间戳df_need['time'] = df_need['time'].map(str_to_int13)

专题：固体力学中应力与应变分析详解（7.应变分析 7.1位移分析）-程序员宅基地

PSO粒子群算法学习笔记_figure(1);ezplot(f,[0,0.01,20]);-程序员宅基地

粒子群算法详解Matlab仿真求解函数 f=xsin(x)cos(2x)-2xsin(3x) ，求其在区间[0,20]上该函数的最大值。clc;clear;close all;%% 初始化种群f= @(x)x .* sin(x) .* cos(2 * x) - 2 * x .* sin(3 * x); % 函数表达式figure(1);ezplot(f,[0,0.01,20]);N = 50; % 初始种群个数d = 1; _figure(1);ezplot(f,[0,0.01,20]);

koa2 原生链接mysql-程序员宅基地

1.安装mysql$ npm install mysql2.代码示例：const mysql = require("mysql");// mysql.Promise = global.Promise;var con = mysql.createConnection({ host: "127.0.0.1", user: "root"...