yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum install -y docker-ce docker-ce-cli containerd.io
mkdir -p /opt/docker
#docker 19.xx 之后
sed -i 's/-H/ \-\-data\-root \/opt\/docker &/' /usr/lib/systemd/system/docker.service
#docker 19.xx及之前
sed -i 's/-H/ \-\-graph \/opt\/docker &/' /usr/lib/systemd/system/docker.service
systemctl daemon-reload
systemctl restart docker
systemctl enable docker
#可选 portainer (docker可视化管理平台)
docker pull 6053537/portainer-ce
docker volume create portainer_data
docker run \
-d \
--name portainer \
-p 9000:9000 \
--restart=always \
-v /var/run/docker.sock:/var/run/docker.sock \
-v portainer_data:/data \
6053537/portainer-ce
Centos仅发行版本中的内核支持 Docker;
Docker 运行在 CentOS 7 上时,要求系统为64位、系统内核版本为 3.10 以上;
Docker 运行在 CentOS-6.5 或更高的版本的 CentOS 上,要求系统为64位、系统内核版本为 2.6.32-431 或者更高版本。
安装docker时要先卸载掉旧的docker。
首先确认Centos的系统是否为64位,内核版本是否满足上述条件,使用 uname -r
查看当前系统内核版本。
[root@localhost /]# uname -r
3.10.0-693.el7.x86_64
1. 删除Docker所在目录
rm -rf /etc/docker
rm -rf /run/docker
rm -rf /var/lib/dockershim
rm -rf /var/lib/docker
2. 干掉Docker进程
使用 ps -ef|grep docker
查询docker进程的PID
然后使用 kill -9 pid
kill掉docker进程
[root@localhost ~]# ps -ef|grep docker
root 98147 1 0 17:20 ? 00:00:00 /usr/bin/dockerd --data-root /opt/docker -H fd:// --containerd=/run/containerd/containerd.sock
root 103785 102158 0 17:24 pts/0 00:00:00 grep --color=auto docker
[root@localhost ~]# kill -9 98147
[root@localhost ~]#
3. 卸载Docker相关的包
使用命令 yum list installed | grep docker
查看相关的包
[root@localhost ~]# yum list installed | grep docker
containerd.io.x86_64 1.6.18-3.1.el7 @docker-ce-stable
docker-buildx-plugin.x86_64 0.10.2-1.el7 @docker-ce-stable
docker-ce.x86_64 3:23.0.1-1.el7 @docker-ce-stable
docker-ce-cli.x86_64 1:23.0.1-1.el7 @docker-ce-stable
docker-ce-rootless-extras.x86_64 23.0.1-1.el7 @docker-ce-stable
docker-compose-plugin.x86_64 2.16.0-1.el7 @docker-ce-stable
docker-scan-plugin.x86_64 0.23.0-3.el7 @docker-ce-stable
[root@localhost ~]#
把匹配到的包用 yum remove
卸载掉
yum remove \
containerd.io.x86_64 \
docker-buildx-plugin.x86_64 \
docker-ce.x86_64 \
docker-ce-cli.x86_64 \
docker-ce-rootless-extras.x86_64 \
docker-compose-plugin.x86_64 \
docker-scan-plugin.x86_64
#安装命令
curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun
#或使用国内 daocloud 一键安装命令
curl -sSL https://get.daocloud.io/docker | sh
Docker安装好后默认路径为 /var/lib/docker ,其下的containers文件夹为容器文件夹,image为镜像文件夹
1. 安装依赖软件包
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-util 提供yum-config-manager
devicemapper 存储驱动程序需要依赖 device-mapper-persistent-data 和 lvm2
2. 设置yum源
#官方源(慢)
yum-config-manager --add-repo http://download.docker.com/linux/centos/docker-ce.repo
#阿里源
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
#清华大学源
yum-config-manager --add-repo https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/centos/docker-ce.repo
[root@localhost ~]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
已加载插件:fastestmirror, langpacks
adding repo from: http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
grabbing file http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@localhost ~]#
3. 安装最新版本的 Docker 和 containerd(想安装指定版本看第四步)
#最新的docker社区版
yum install -y docker-ce docker-ce-cli containerd.io
4. 安装指定版本
要安装特定版本的 Docker ,先使用 yum list docker-ce --showduplicates | sort -r
在存储库中列出可用版本,然后选择并安装
[root@localhost ~]# yum list docker-ce --showduplicates | sort -r
已加载插件:fastestmirror, langpacks
已安装的软件包
可安装的软件包
* updates: mirrors.ustc.edu.cn
Loading mirror speeds from cached hostfile
* extras: mirrors.ustc.edu.cn
docker-ce.x86_64 3:23.0.1-1.el7 docker-ce-stable
docker-ce.x86_64 3:23.0.1-1.el7 @docker-ce-stable
docker-ce.x86_64 3:23.0.0-1.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.9-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.8-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.7-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.6-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.5-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.4-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.3-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.2-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.23-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.22-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.21-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.20-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.19-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.18-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.17-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.16-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.15-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.14-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.13-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.12-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.11-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.10-3.el7 docker-ce-stable
docker-ce.x86_64 3:20.10.0-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.9-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.8-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.7-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.6-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.5-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.4-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.3-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.2-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.15-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.14-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.13-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.12-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.11-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.10-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.0-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.9-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.8-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.7-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.6-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.5-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.4-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.3-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.2-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.3.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.2.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.1.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.0.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 18.03.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.3.ce-1.el7 docker-ce-stable
docker-ce.x86_64 17.03.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.0.ce-1.el7.centos docker-ce-stable
* base: mirrors.ustc.edu.cn
[root@localhost ~]#
软件包名称是docker-ce加上第二列版本字符串,从第一个冒号(:)到第一个连字符(-)之间的就是版本号,例:**docker-ce-20.10.9 docker-ce-cli-20.10.9**
#安装指定版本
yum install -y docker-ce-20.10.9 docker-ce-cli-20.10.9 containerd.io
5. 指定docker最终竞选和容器路径(可跳过)
需要注意的时docker在19.xx及之前版本指定路径使用的是 --graph
;而在docker 19.xx之后指定路径时使用的是 data-root
(实测docker 20.10.21中也可以使用–graph)。
docker指定路径需要修改 /usr/lib/systemd/system/docker.service
,
直接使用代码修改(点一次,不小心加多了就去 /usr/lib/systemd/system/docker.service
删)
#docker 19.xx 之后
sed -i 's/-H/ \-\-data\-root \/opt\/docker &/' /usr/lib/systemd/system/docker.service
#docker 19.xx及之前
sed -i 's/-H/ \-\-graph \/opt\/docker &/' /usr/lib/systemd/system/docker.service
或者 vi /usr/lib/systemd/system/docker.service
找到 [Service]
,在 ExecStart
中加入 --graph /opt/docker
或 --data-root /opt/docker
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStart=/usr/bin/dockerd --graph /opt/docker -H fd:// --containerd=/run/containerd/containerd.sock
ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always
或者修改docker的配置文件/etc/docker/daemon.json
,效果一样。
#在其中添加
"graph":"/opt/docker"
#或
"data-root":"/opt/docker"
修改完了之后使用 systemctl daemon-reload
重新加载服务
[root@localhost ~]# systemctl daemon-reload
[root@localhost ~]#
6. 启动dokcer
#重启docker
systemctl restart docker
#设置开机启动
systemctl enable docker
portainer就是一个docker的可视化管理平台,这里的是中文版的
docker pull 6053537/portainer-ce
docker volume create portainer_data
docker run \
-d \
--name portainer \
-p 9000:9000 \
--restart=always \
-v /var/run/docker.sock:/var/run/docker.sock \
-v portainer_data:/data \
6053537/portainer-ce
[root@localhost /]# yum install -y yum-utils device-mapper-persistent-data lvm2
已加载插件:fastestmirror
base | 3.6 kB 00:00:00
One of the configured repositories failed (未知),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Disable the repository, so yum won't use it by default. Yum will then
just ignore the repository until you permanently enable it again or use
--enablerepo for temporary usage:
yum-config-manager --disable <repoid>
4. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot retrieve metalink for repository: epel/x86_64. Please verify its path and try again
解决办法
修改 /etc/yum.repos.d/epel.repo
文件
vi /etc/yum.repos.d/epel.repo
注释metalink,放开baseurl注释,保存
[epel]
name=Extra Packages for Enterprise Linux 7 - $basearch
baseurl=https://repo.huaweicloud.com/epel/7/$basearch
#metalink=https://mirrors.fedoraproject.org/#metalink?repo=epel-7&arch=$basearch
failovermethod=priority
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
之后重建yum缓存
yum clean all
yum makecache
#update可选
yum update
解决办法
yum erase podman buildah
文章浏览阅读290次,点赞8次,收藏10次。1.背景介绍稀疏编码是一种用于处理稀疏数据的编码技术,其主要应用于信息传输、存储和处理等领域。稀疏数据是指数据中大部分元素为零或近似于零的数据,例如文本、图像、音频、视频等。稀疏编码的核心思想是将稀疏数据表示为非零元素和它们对应的位置信息,从而减少存储空间和计算复杂度。稀疏编码的研究起源于1990年代,随着大数据时代的到来,稀疏编码技术的应用范围和影响力不断扩大。目前,稀疏编码已经成为计算...
文章浏览阅读217次。EasyGBS - GB28181 国标方案安装使用文档下载安装包下载,正式使用需商业授权, 功能一致在线演示在线API架构图EasySIPCMSSIP 中心信令服务, 单节点, 自带一个 Redis Server, 随 EasySIPCMS 自启动, 不需要手动运行EasySIPSMSSIP 流媒体服务, 根..._easygbs-windows-2.6.0-23042316使用文档
文章浏览阅读1.2k次,点赞27次,收藏7次。2023巅峰极客 BabyURL之前AliyunCTF Bypassit I这题考查了这样一条链子:其实就是Jackson的原生反序列化利用今天复现的这题也是大同小异,一起来整一下。_原生jackson 反序列化链子
文章浏览阅读734次,点赞9次,收藏7次。微服务架构简单的说就是将单体应用进一步拆分,拆分成更小的服务,每个服务都是一个可以独立运行的项目。这么多小服务,如何管理他们?(服务治理 注册中心[服务注册 发现 剔除])这么多小服务,他们之间如何通讯?这么多小服务,客户端怎么访问他们?(网关)这么多小服务,一旦出现问题了,应该如何自处理?(容错)这么多小服务,一旦出现问题了,应该如何排错?(链路追踪)对于上面的问题,是任何一个微服务设计者都不能绕过去的,因此大部分的微服务产品都针对每一个问题提供了相应的组件来解决它们。_spring cloud
文章浏览阅读5.9k次,点赞6次,收藏20次。Js实现图片点击切换与轮播图片点击切换<!DOCTYPE html><html> <head> <meta charset="UTF-8"> <title></title> <script type="text/ja..._点击图片进行轮播图切换
文章浏览阅读10w+次,点赞245次,收藏1.5k次。在开始安装前,如果你的电脑装过tensorflow,请先把他们卸载干净,包括依赖的包(tensorflow-estimator、tensorboard、tensorflow、keras-applications、keras-preprocessing),不然后续安装了tensorflow-gpu可能会出现找不到cuda的问题。cuda、cudnn。..._tensorflow gpu版本安装
文章浏览阅读243次。0x00 简介权限滥用漏洞一般归类于逻辑问题,是指服务端功能开放过多或权限限制不严格,导致攻击者可以通过直接或间接调用的方式达到攻击效果。随着物联网时代的到来,这种漏洞已经屡见不鲜,各种漏洞组合利用也是千奇百怪、五花八门,这里总结漏洞是为了更好地应对和预防,如有不妥之处还请业内人士多多指教。0x01 背景2014年4月,在比特币飞涨的时代某网站曾经..._使用物联网漏洞的使用者
文章浏览阅读786次。A. Epipolar geometry and triangulationThe epipolar geometry mainly adopts the feature point method, such as SIFT, SURF and ORB, etc. to obtain the feature points corresponding to two frames of images. As shown in Figure 1, let the first image be and th_normalized plane coordinates
文章浏览阅读708次,点赞2次,收藏3次。开放信息抽取(OIE)系统(三)-- 第二代开放信息抽取系统(人工规则, rule-based, 先关系再实体)一.第二代开放信息抽取系统背景 第一代开放信息抽取系统(Open Information Extraction, OIE, learning-based, 自学习, 先抽取实体)通常抽取大量冗余信息,为了消除这些冗余信息,诞生了第二代开放信息抽取系统。二.第二代开放信息抽取系统历史第二代开放信息抽取系统着眼于解决第一代系统的三大问题: 大量非信息性提取(即省略关键信息的提取)、_语义角色增强的关系抽取
文章浏览阅读1.1w次,点赞6次,收藏51次。快速完成网页设计,10个顶尖响应式HTML5网页模板助你一臂之力为了寻找一个优质的网页模板,网页设计师和开发者往往可能会花上大半天的时间。不过幸运的是,现在的网页设计师和开发人员已经开始共享HTML5,Bootstrap和CSS3中的免费网页模板资源。鉴于网站模板的灵活性和强大的功能,现在广大设计师和开发者对html5网站的实际需求日益增长。为了造福大众,Mockplus的小伙伴整理了2018年最..._html欢迎页面
文章浏览阅读282次。原标题:2018全国计算机等级考试调整,一、二级都增加了考试科目全国计算机等级考试将于9月15-17日举行。在备考的最后冲刺阶段,小编为大家整理了今年新公布的全国计算机等级考试调整方案,希望对备考的小伙伴有所帮助,快随小编往下看吧!从2018年3月开始,全国计算机等级考试实施2018版考试大纲,并按新体系开考各个考试级别。具体调整内容如下:一、考试级别及科目1.一级新增“网络安全素质教育”科目(代..._计算机二级增报科目什么意思
文章浏览阅读240次。conan简单使用。_apt install conan