Oracle10.2.0.1RAC 升级 Oracle10.2.0.5案例分享 -CRS篇_craeta oci 10.2-程序员宅基地
这是一次数据库升级的案例。原有的数据库是Oracle9i 9.2.0.7 双节点RAC，运行在AIX5.3.0.0操作系统上。由于应用程序的限制，只能升级到Oracle10g 10.2.0.5。 Oracle10g 10.2.0.5没有独立的安装包，需要先安装Oracle10.2.0.1在通过升级包来升级到该版本。在新服务器上安装和升级的好处是不需要升级数据字典，在完成集群软件和数据库软件的升级后直接使用dbca创建数据库就可以了，省去一些步骤。
oracle10.2.0.5升级包解压缩后是一个Disk1文件夹，并没有区分集群软件和数据库软件。在我们手动安装时根据输入CRS_HOME和ORACLE_HOME来区分所升级的项目。
本次采用的介质如下
集群软件 ： 10gr2_aix5l64_cluster.cpio.gz,
数据库软件：10gr2_aix5l64_database.cpio.gz,
升级包： p8202632_10205_AIX64-5L_1of2.zip, p8202632_10205_AIX64-5L_2of2.zip
实施环境
Oracle10g RAC+ASM
AIX:5.3_X86_64
SQL> sqlplus / as sysdba
DB version:10.2.0.1
$ crsctl query crs softwareversion
CRS version:10.2.0.1
节点1：scgl1
Instance:PROD1
$ORACLE_HOME:/u01/app/oracle/product/10.2.0/db_1
$CRS_HOME:/u01/app/oracle/product/10.2.0/crs_1
节点2：scgl2
Instance:PROD2
$ORACLE_HOME:/u01/app/oracle/product/10.2.0/db_1
$CRS_HOME:/u01/app/oracle/product/10.2.0/crs_1
集群软件升级（10.2.0.1 - 10.2.0.5）
PATCH: p8202632_10205_AIX64-5L_1of2.zip, p8202632_10205_AIX64-5L_2of2.zip
1. 关闭crs资源
$ crs_stop -all
$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.scgl1.gsd application OFFLINE OFFLINE
ora.scgl1.ons application OFFLINE OFFLINE
ora.scgl1.vip application OFFLINE OFFLINE
ora.scgl2.gsd application OFFLINE OFFLINE
ora.scgl2.ons application OFFLINE OFFLINE
ora.scgl2.vip application OFFLINE OFFLINE
2. 解压升级文件
$ pwd
/backup/install/10205
unzip p8202632_10205_AIX64-5L_1of2.zip
unzip p8202632_10205_AIX64-5L_2of2.zip
3. 确保图像化正常启动
cd Disk1
$ export DISKPLAY=10.67.224.26:0.0
4. 启动升级
$ ./runInstaller
5. 开始图像界面升级
6. 先开始CRS的升级，注意Patch路径选择$ORA_CRS_HOME
可以点击Installed Products按钮来查看Name与Path的对应关系
7. 点击Next
8. 完成环境检查，Next
9. 点击Install,开始真正的安装
10. 等待进度条满后，Next
11. 根据要求执行1. 2.两步操作
节点scgl1
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl stop crs
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
#
# /u01/app/oracle/product/10.2.0/crs_1/install/root102.sh
Error : Please change the CRS_ORACLE_USER id <oracle> to have the following OS capabilities :
< CAP_PROPAGATE CAP_BYPASS_RAC_VMM CAP_NUMA_ATTACH >
by running </usr/bin/chuser> command then 'crsctl stop crs' and 'crsctl start crs'.
The CSS daemon, ocssd.bin, will not run in realtime without this change
Oracle strongly recommends that the CSS daemon run realtime
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /u01/app/oracle/product/10.2.0/crs_1
Relinking some shared libraries.
Relinking of patched files is complete.
Copying opriproc to /etc/oracle/bin for AIX
WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Adding daemons to inittab
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
.
10205 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully deleted 1 values from OCR.
Successfully deleted 1 keys from OCR.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: scgl1 scgl1_priv scgl1
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
clscfg -upgrade completed successfully
Creating '/u01/app/oracle/product/10.2.0/crs_1/install/paramfile.crs' with data used for CRS configuration
Setting CRS configuration values in /u01/app/oracle/product/10.2.0/crs_1/install/paramfile.crs
节点scgl2
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl stop crs
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
#
# /u01/app/oracle/product/10.2.0/crs_1/install/root102.sh
Error : Please change the CRS_ORACLE_USER id <oracle> to have the following OS capabilities :
< CAP_PROPAGATE CAP_BYPASS_RAC_VMM CAP_NUMA_ATTACH >
by running </usr/bin/chuser> command then 'crsctl stop crs' and 'crsctl start crs'.
The CSS daemon, ocssd.bin, will not run in realtime without this change
Oracle strongly recommends that the CSS daemon run realtime
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /u01/app/oracle/product/10.2.0/crs_1
Relinking some shared libraries.
Relinking of patched files is complete.
Copying opriproc to /etc/oracle/bin for AIX
WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Adding daemons to inittab
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
.
10205 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully deleted 1 values from OCR.
Successfully deleted 1 keys from OCR.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 2: scgl2 scgl2_priv scgl2
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
clscfg -upgrade completed successfully
Creating '/u01/app/oracle/product/10.2.0/crs_1/install/paramfile.crs' with data used for CRS configuration
Setting CRS configuration values in /u01/app/oracle/product/10.2.0/crs_1/install/paramfile.crs
脚本执行结束后，crs及各项服务已经自动启动了
12. 验证版本信息
节点scgl1
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl query crs softwareversion scgl1
CRS software version on node [scgl1] is [10.2.0.5.0]
节点scgl2
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl query crs softwareversion scgl2
CRS software version on node [scgl2] is [10.2.0.5.0]
节点scgl1
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
节点scgl2
# /u01/app/oracle/product/10.2.0/crs_1/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
# su - oracle
$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.scgl1.gsd application ONLINE ONLINE scgl1
ora.scgl1.ons application ONLINE ONLINE scgl1
ora.scgl1.vip application ONLINE ONLINE scgl1
ora.scgl2.gsd application ONLINE ONLINE scgl2
ora.scgl2.ons application ONLINE ONLINE scgl2
ora.scgl2.vip application ONLINE ONLINE scgl2
到此位置集群软件的升级结束，由于篇幅图片编辑等限制数据库升级再下一篇博客中介绍。
智能推荐
python简易爬虫v1.0-程序员宅基地
文章浏览阅读1.8k次，点赞4次，收藏6次。python简易爬虫v1.0作者：William Ma (the_CoderWM)进阶python的首秀，大部分童鞋肯定是做个简单的爬虫吧，众所周知，爬虫需要各种各样的第三方库，例如scrapy, bs4, requests, urllib3等等。此处，我们先从最简单的爬虫开始。首先，我们需要安装两个第三方库：requests和bs4。在cmd中输入以下代码：pip install requestspip install bs4等安装成功后，就可以进入pycharm来写爬虫了。爬
安装flask后vim出现：error detected while processing /home/zww/.vim/ftplugin/python/pyflakes.vim:line 28_freetorn.vim-程序员宅基地
文章浏览阅读2.6k次。解决方法：解决方法可以去github重新下载一个pyflakes.vim。执行如下命令git clone --recursive git://github.com/kevinw/pyflakes-vim.git然后进入git克降目录，./pyflakes-vim/ftplugin,通过如下命令将python目录下的所有文件复制到~/.vim/ftplugin目录下即可。cp -R ...._freetorn.vim
HIT CSAPP大作业：程序人生—Hello‘s P2P-程序员宅基地
文章浏览阅读210次，点赞7次，收藏3次。本文简述了hello.c源程序的预处理、编译、汇编、链接和运行的主要过程，以及hello程序的进程管理、存储管理与I/O管理，通过hello.c这一程序周期的描述，对程序的编译、加载、运行有了初步的了解。_hit csapp
18个顶级人工智能平台-程序员宅基地
文章浏览阅读1w次，点赞2次，收藏27次。来源：机器人小妹 很多时候企业拥有重复，乏味且困难的工作流程，这些流程往往会减慢生产速度并增加运营成本。为了降低生产成本，企业别无选择，只能自动化某些功能以降低生产成本。 通过数字化..._人工智能平台
electron热加载_electron-reloader-程序员宅基地
文章浏览阅读2.2k次。热加载能够在每次保存修改的代码后自动刷新 electron 应用界面，而不必每次去手动操作重新运行，这极大的提升了开发效率。安装 electron 热加载插件热加载虽然很方便，但是不是每个 electron 项目必须的，所以想要舒服的开发 electron 就只能给 electron 项目单独的安装热加载插件[electron-reloader]:// 在项目的根目录下安装 electron-reloader，国内建议使用 cnpm 代替 npmnpm install electron-relo._electron-reloader
android 11.0 去掉recovery模式UI页面的选项_android recovery 删除 部分菜单-程序员宅基地
文章浏览阅读942次。在11.0 进行定制化开发，会根据需要去掉recovery模式的一些选项 就是在device.cpp去掉一些选项就可以了。_android recovery 删除 部分菜单
随便推点
echart省会流向图（物流运输、地图）_java+echart地图+物流跟踪-程序员宅基地
文章浏览阅读2.2k次，点赞2次，收藏6次。继续上次的echart博客，由于省会流向图是从echart画廊中直接取来的。所以直接上代码<!DOCTYPE html><html><head> <meta charset="utf-8" /> <meta name="viewport" content="width=device-width,initial-scale=1,minimum-scale=1,maximum-scale=1,user-scalable=no" /&_java+echart地图+物流跟踪
Ceph源码解析：读写流程_ceph 发送数据到其他副本的源码-程序员宅基地
文章浏览阅读1.4k次。一、OSD模块简介1.1 消息封装：在OSD上发送和接收信息。cluster_messenger -与其它OSDs和monitors沟通client_messenger －与客户端沟通1.2 消息调度：Dispatcher类，主要负责消息分类1.3 工作队列：1.3.1 OpWQ: 处理ops（从客户端）和sub ops（从其他的OSD）。运行在op_tp线程池。1...._ceph 发送数据到其他副本的源码
进程调度（一）——FIFO算法_进程调度fifo算法代码-程序员宅基地
文章浏览阅读7.9k次，点赞3次，收藏22次。一 定义这是最早出现的置换算法。该算法总是淘汰最先进入内存的页面，即选择在内存中驻留时间最久的页面予以淘汰。该算法实现简单，只需把一个进程已调入内存的页面，按先后次序链接成一个队列，并设置一个指针，称为替换指针，使它总是指向最老的页面。但该算法与进程实际运行的规律不相适应，因为在进程中，有些页面经常被访问，比如，含有全局变量、常用函数、例程等的页面，FIFO 算法并不能保证这些页面不被淘汰。这里，我_进程调度fifo算法代码
mysql rownum写法_mysql应用之类似oracle rownum写法-程序员宅基地
文章浏览阅读133次。rownum是oracle才有的写法，rownum在oracle中可以用于取第一条数据，或者批量写数据时限定批量写的数量等mysql取第一条数据写法SELECT * FROM t order by id LIMIT 1;oracle取第一条数据写法SELECT * FROM t where rownum =1 order by id;ok，上面是mysql和oracle取第一条数据的写法对比，不过..._mysql 替换@rownum的写法
eclipse安装教程_ecjelm-程序员宅基地
文章浏览阅读790次，点赞3次，收藏4次。官网下载下载链接：http://www.eclipse.org/downloads/点击Download下载完成后双击运行我选择第2个，看自己需要（我选择企业级应用，如果只是单纯学习java选第一个就行）进入下一步后选择jre和安装路径修改jvm/jre的时候也可以选择本地的（点后面的文件夹进去），但是我们没有11版本的，所以还是用他的吧选择接受安装中安装过程中如果有其他界面弹出就点accept就行..._ecjelm
Linux常用网络命令_ifconfig 删除vlan-程序员宅基地
文章浏览阅读245次。原文链接：https://linux.cn/article-7801-1.htmlifconfigping <IP地址>:发送ICMP echo消息到某个主机traceroute <IP地址>：用于跟踪IP包的路由路由：netstat -r: 打印路由表route add ：添加静态路由路径routed：控制动态路由的BSD守护程序。运行RIP路由协议gat..._ifconfig 删除vlan